As I wrote local IP address and gateway IP address are different aren't them ?

For the DNS, your FAI's one.

When you go into Setup of rabbit I type 193.168.1.1. When imposed Router always type 193.168.1.1. But as you had written should be so ... Mistake?

But I repeat: I HOC a connection not ever created. Since we can not, I do not know if anything can focus.

Then on a site I found DNS addresses using my Provider.

Or you reported DNS that I give commands in IpConfig / all.

.

Damned ! you d'on't understand or you did not read what I wrote
SSID : lynksis
No encryption type
Key : Nothing

Advanced configuration
Authentication : OpenSystem (for a wep key) SharedKey (WPA Key)
DHCP Enabled : NO
Local IP : 192.168.1.25 (example)
Local Mask : 255.255.255.0 <= must be
Local Gateway : 192.168.1.1 <= must be
DNS Server : x.x.x.x <= your Internet Service Provider (ISP) DNS address. Ask your ISP for that !

Proxy Server
HTTP Proxy : No
Proxy IP Address : 0.0.0.0
Proxy port : 0

General info
Violet Platform : r.nabaztag.com/vl or 193.149.120.33/vl at the end it is a "L" like Laurence

Now I hate.

Does not work ..

If you set a static IP this line "DNS Server : x.x.x.x" must be filled well with DNS IP address from your ISP. It can't be 0.0.0.0

I compiled all fields exactly, even entering the IP address of my ISP. Being a private network, they have also called me to say my preliminary ip "Free" to do this. But not working. It should not be.

But I followed everything to the letter. I would not like that at the end is something in my line [as Ip manuals], which I set evil. But I think not. Each has its own address, and the router can easily connect to the Internet.

Hi all,
i have a similar problem to your...
3 led green and 1 orange....
I tried to replace my linksys router with a d-link router, i tried to create a rule on the firewall that accepts all traffic tcp / udp, i also tried to disable the wpa protection of my wifi network, but nothing changes...
I checked the version of the firmware and is already updated.

I sniff the outgoing traffic from my access point and see that the bunny tries to connect to the server 193.149.120.33 on port tcp 80 but i see only syn packets and not receive a response from the server.

Sorry, a question...
It's correct typing in my notebook browser address 193.149.120.33/vl I receive an error message "Error 404 page not found" and if i type in my notebook browser address 193.149.120.33 i get redirected to the site http://my.nabaztag.com/vl/action/myHome.do ?

thank's
Zenze

did you change violet plateform r.nabaztag.com/vl by 193.149.120.33/vl (with a L at the end of this address) ?

yes, i tried it...

I also see that the DNS server correctly solves the name ...

I do not know what to do more ...

Could you post a screen shot of your configuration page please ?

now i can't post a print screen, but this is my config:

SSID : casa
Encryption WPA

Advanced configuration
Authentication : WPA Key

DHCP Enabled : yes
Local IP : 10.40.0.21
Local Mask : 255.255.255.0
Local Gateway : 10.40.0.254
DNS Server : 10.40.0.100

I create an ip reservation for the bunny on my DHCP server (windows 2003 server)

Proxy Server
HTTP Proxy : No
Proxy IP Address : 0.0.0.0
Proxy port : 0

General info
Violet Platform : 193.149.120.33/vl

firmware .10

bye
Zenze

I think your DNS address is wrong. Use ISP's DNS

Not working yet...

I tried an install a proxy server in my house and i set the bunny tu use this with my config (posted upper) and the bunny WORKS!

tomorrow i try to reconfigure a bunny with url r.nabaztag.com/vl and the porxy server...

thank's
Zenze